Carpentry stools

[Cameron Wood]

I made these in 1979 based on something I saw driving past a worksite. They still work well, 'tho worn almost an inch shorter from being dragged around on concrete.

A few years ago someone gave me scraps of nice plywood so I made more, thinking I would sell them, but they got put to use instead. The picture shows the four standing heights possible. A hammer claw easily picks one up without bending. They get used a lot during moves of heavy things to get a partial lift.

Anyway, out for a walk I saw this at the site of a nice fence being built. Probably 20" tall, which is a pretty huge step up- mine are 16".

511520511521

[Warren Lake]

should be a rectangular box then you have three heights

[Tom M King]

The last carpenter I knew that used those was77 years old in 1977. Easy to remember.

[Kevin Jenness]

My workmate calls them "fun boxes". Rectangular for versatility as Warren said.

[Tom M King]

I like these better.

[Mark Wooden]

We called them 'lunch benches' when I worked with a large crew, seems everyone had one of different styles and sizes

16" x 24" top, 18" tall, rubber pads on the feet for use indoors, tool tray underneath. This one is about 17-18 yrs old511547

[Cameron Wood]

We called them 'lunch benches' when I worked with a large crew, seems everyone had one of different styles and sizes

16" x 24" top, 18" tall, rubber pads on the feet for use indoors, tool tray underneath. This one is about 17-18 yrs old511547



I made one like that, but had to cut the overhanging ends off because I kept tipping the stool by standing there.

I like the handle hole.

[Edward Weber]

We called them 'lunch benches' when I worked with a large crew, seems everyone had one of different styles and sizes

16" x 24" top, 18" tall, rubber pads on the feet for use indoors, tool tray underneath. This one is about 17-18 yrs old511547
This is the type I grew up with, we called them "tote benches". I've been planning on making a few, thanks for posting.

[Ron Selzer]

I like these better.

Tom
what make and model are those, PLEASE.
Ron

[Tom M King]

Reechcraft Bronco

I’m on phone or would include link. They’re fairly lightweight but very stiff and sturdy. Don’t shake at all.

I have one if those carpenters benches somewhere.

[Ron Selzer]

Reechcraft Bronco

I’m on phone or would include link. They’re fairly lightweight but very stiff and sturdy. Don’t shake at all.

I have one if those carpenters benches somewhere.

Found the web site along with various places to buy at. Definitely a nice tool if you have a need for it. $260-$300 each
Thanks
Ron

[Tom M King]

Not cheap but well worth it to me. I don’t work off ladders. They’re very well made. A little aggravating to set up because there are no clearances, but not bad at all, especially after you have used them once and know what’s coming.

[Ron Selzer]

I no longer am allowed on ladders. If I had to build new porches again, I definitely would buy a set first.

[Tom M King]

Here they are stored with my step and platform ladders, to the left on their sides. I do work off platform ladders, but only go up or down on regular ladders.

[Mark Wooden]

I made one like that, but had to cut the overhanging ends off because I kept tipping the stool by standing there.

I like the handle hole.

The picture doesnt show it, but the legs are splayed at the bottom so the overhang of the top isnt enough to be able to tip it.