Marley Jeffs
09-18-2023, 6:18 PM
Hey folks! I’m new and have come here in hopes to get answers to my questions. I recently purchased a used Speedy 300 and it has served me well. I sell on Etsy and orders have skyrocketed. Of course, the laser had to wait until I was in the heat of production to malfunction. This machine is the only way I can get my orders out on time so I’d love any suggestions.
After talking to a Trotec technician a week or so ago, I narrowed a previous problem down to my table not being level. I got that fixed and got back into production. Yesterday , I double checked my table (I’d been in a hurry before) and noticed it needed adjusted barely more. Got that done and got back into production.
Now to the problem…this morning when I went out to work, the table malfunctioned about 4” from the laser head. I tried several different things and it has only gotten worse. Now it won’t even zero without an error code. I contacted Trotec this morning but haven’t heard back. Any ideas are greatly appreciated as my next batch of orders are due to ship out on Wednesday.
Thanks in advance!
After talking to a Trotec technician a week or so ago, I narrowed a previous problem down to my table not being level. I got that fixed and got back into production. Yesterday , I double checked my table (I’d been in a hurry before) and noticed it needed adjusted barely more. Got that done and got back into production.
Now to the problem…this morning when I went out to work, the table malfunctioned about 4” from the laser head. I tried several different things and it has only gotten worse. Now it won’t even zero without an error code. I contacted Trotec this morning but haven’t heard back. Any ideas are greatly appreciated as my next batch of orders are due to ship out on Wednesday.
Thanks in advance!