Drink Carrier

[steven c newman]

507259
Just using up some thin scrap wood.

.507260
With a steel bar for a handle..

[Andrew More]

Fun project! Nice to see something besides beer (not that there's anything wrong with that).

[Jim Koepke]

A bigger tote would hold those bottles (and some glasses) more securely.

507270

Then it could be flipped over and used as a table or a stool.

jtk

[Cameron Wood]

A bigger tote would hold those bottles (and some glasses) more securely.

507270

Then it could be flipped over and used as a table or a stool.

jtk



Or with wheels for a pony keg!

[steven c newman]

As I said..just using up the scraps I had on hand....only thing I actually bought was a piece of flat bar stock..
507273
Grinder made a notch
507274
Vise and a hammer to make the bends..
507275
Joinery was fairly simple...except at the 4 outside corners..
507276
Which were through dovetails...handle was sized to allow my hand to grab onto it..
507277
Which was supposed to be tapped for the 4 bolt...until I snapped my only and only tap I had on-hand, while tapping just the second hole....So, now 4 nuts hold the 4 bolts in place.
507278
Handle also allowed me to hold the carrier while brushing on the coat of Witch's Brew Stain.

Just a way to use up a stack of thin scraps....