Interchangeable screwdriver set compatible with impact drivers ?

[Stephen Tashiro]

Is there a interchangeable screwdriver set (manual, not electric) whose bits also fit typical impact drivers?

I have several interchangeable screwdrivers, but their bits don't fit Dewalt or Ryobi impact drivers - the kind of impact driver used to drive screws in construction work, not automotive impact drivers.

The screwdriver sets I've browsed online don't specify the shaft size of their bits.

[Tom M King]

Wiha not only probably makes something you're looking for, but the bits are as good as they come.

https://www.amazon.com/Wiha-76885-Piece-MaxxTor-Impact/dp/B0BZTFC29H/ref=asc_df_B0BZTFC29H/?tag=hyprod-20&linkCode=df0&hvadid=663313496146&hvpos=&hvnetw=g&hvrand=10801293062609938778&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009786&hvtargid=pla-2187643806454&psc=1&gclid=CjwKCAjw3dCnBhBCEiwAVvLcu6b5yubcKCeFw_ebMOBC 5VaXDjgu9Bg4MsFC3O3b0BQ2ifOwNcrM6xoC_zcQAvD_BwE

They don't snap in the Snap On ratcheting screwdriver, but the good magnet in the end keeps them in place.

https://shop.snapon.com/product/Standard-Handle/8-3-4%22-Ratcheting-Standard-Screwdriver-(Orange)/SSDMR4BO

I'm sure Wiha has plenty of choices too.

[Clint Baxter]

Wiha not only probably makes something you're looking for, but the bits are as good as they come.

https://www.amazon.com/Wiha-76885-Piece-MaxxTor-Impact/dp/B0BZTFC29H/ref=asc_df_B0BZTFC29H/?tag=hyprod-20&linkCode=df0&hvadid=663313496146&hvpos=&hvnetw=g&hvrand=10801293062609938778&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009786&hvtargid=pla-2187643806454&psc=1&gclid=CjwKCAjw3dCnBhBCEiwAVvLcu6b5yubcKCeFw_ebMOBC 5VaXDjgu9Bg4MsFC3O3b0BQ2ifOwNcrM6xoC_zcQAvD_BwE

They don't snap in the Snap On ratcheting screwdriver, but the good magnet in the end keeps them in place.

https://shop.snapon.com/product/Standard-Handle/8-3-4%22-Ratcheting-Standard-Screwdriver-(Orange)/SSDMR4BO

I'm sure Wiha has plenty of choices too.

I use the Wera sets such as this one, https://www.kctool.com/wera-059295-kraftform-kompakt-60-metric-pouch-set/ The bits fit in both the provided screwdriver handle and my power drives. I've also bought flat tip bits from Wiha to augment the Wera set and they fit the 1/4" hex drive as well without any problems.

Clint

[George Yetka]

I have a few It depends on what im doing with it. If I am going to a job and dont know what Ill need I have a wera Tool check
https://www.kctool.com/wera-056490-tool-check-plus-bit-ratchet-set-with-sockets-metric/

My favorite ratcheting is one I bought 20 years ago from Mac. It is ratcheting, not oversized, and has no degree of makeup if you turn it back a 1/4mm it grabs.

I use this one if I know I need a screwdriver
https://www.kctool.com/wera-073661-kraftform-kompakt-27-ra-2-sb/

[Edward Weber]

I bought a Malco handle for use with my power driven bits, It has the same type of spring loaded locking ring as what you use on drill/drivers.
https://www.malcoproducts.com/category/screwdrivers-nutdrivers/connext-quick-change-handles/