Performax Miter Gear

[Dave Winters]

HiI
I have a Performax 22-44. I have broken teeth on a miter gear. It's part #20-1101.
I looked on ereplacementparts, and it's discontinued, not available, but that's for a Jet machine, which looks identical.
I think Jet bought out Performax, is that right?
Any ideas where I can look?
Thanks!
Dave

[Bill Dufour]

I think I posted a Boston gear part number for that in metal not plastic. Several months ago
BilL D

https://www.bostongear.com/products/open-gearing/stock-gears/miter-bevel-gears

[Dave Winters]

Bill, thanks. Couldn't find it though. Did you have a part #?

[Bill Dufour]

Pretty much just tooth count and bore size. You will have to figure out pressure angle to match or just replace both gears. Is this the one made of plastic? I have no idea what the Boston number is.
PA is likely 20 or 14.5. If both gears are worn it can be hard to see what the angle used to be.
Bill D

[Dave Winters]

O.K., thanks!

[Russell Hayes]

I had the same issue with my 22-44. I bought 4 Boston HLK101Y. 1:1, 20 DEGREE, .5 BORE, 12 PITCH, 15 TEETH, STEEL. Worked out great on my machine.