Richard Coers
08-23-2023, 8:52 PM
We lost the last commercial grinding service in our region last October. When I recently saw a Tormek blade fixture on eBay at a great price, new in box, I spent the $150. I do have a 10" 1200 grit CBN wheel on the Jet machine. First setup took a bit to hit the perfect spot in the center of the bevel, but by the time I did the third blade, it only took 2 minutes and 40 seconds to get a shaving quality single 12" blade done. I put a few strokes on a water stone to cut off the burr from the back and then a few strokes on the front. Of course this isn't a cheap option if you don't have a Tormek or Jet, and the wheel is now $230 by itself, by I'm extremely pleased! No more $30 round trip shipping and $27 sharpening charges. Turning 71 next month, I doubt if I do enough blades to pay off the investment, but I sure do love fresh blades in a jointer!
506513
506513