PDA

View Full Version : Oneway switch-up


Kevin Jenness
07-25-2023, 4:58 PM
The swing-arm mounted control box on my Oneway 2436 was not my favorite feature. I removed the control arm and bolted two magnets to the back of the box so I can start, stop and adjust the speed from either side of the headstock without reaching across the line of fire.
504908504909504911
John Kananis
07-26-2023, 9:41 AM
Kevin, that's a great idea. It's the only complaint I have about my laguna is that I can't relocate the controls. Very nice.
Richard Coers
07-26-2023, 11:57 AM
The swing arm has worked fine for me for 25 years. Hey, I just realized I need to have an anniversary party for my lathe!!!!
Kevin Jenness
07-26-2023, 1:22 PM
The swing arm has worked fine for me for 25 years. Hey, I just realized I need to have an anniversary party for my lathe!!!!

Mine is also 25 years old, though new to me. It's working well, although I have to send in the live center for bearing replacement.