PDA

View Full Version : Article #4: Making a Segmented Bowl by Ken Salisbury



Aaron Koehl
07-23-2003, 12:41 AM
Bravo to our latest contributor--Ken Salisbury!

Here's an article for the intermediate woodworker
on making segmented bowls!

The article can be found here:
http://www.sawmillcreek.org/articles/4

Comments welcome!

_Aaron_

Mike Schwing
07-29-2003, 10:25 AM
Bravo to our latest contributor--Ken Salisbury!

Here's an article for the intermediate woodworker
on making segmented bowls!

The article can be found here:
http://www.sawmillcreek.org/articles/4

Comments welcome!

_Aaron_

Excellent article Ken! When one day I finally buy a lathe....

Bob Oswin
08-13-2003, 2:32 PM
Bravo to our latest contributor--Ken Salisbury!

Here's an article for the intermediate woodworker
on making segmented bowls!

The article can be found here:
http://www.sawmillcreek.org/articles/4

Comments welcome!

_Aaron_
A big thanks to Ken for taking the time and expertise to bring this information to the site.

Bob

BuLLdoGG
09-10-2003, 8:29 PM
Good Post nice Download thx

Michael Stafford
09-02-2004, 5:30 PM
Ken I love making segmented bowls. I use a slightly different technique which involves using a miter saw and compound miters. I learned this technique from Don Russell at John C. Campbell Folk School. It involves using a compound miter booklet that you get from Bridge City tools. It works great but I am probably not the best one to explain it. I have done quite a few bowls and vases with the technique. In October I am taking another course that carries the technique farther to create rings of compound miters to form an urn. I hope to be able to post pictures when I return. Love the segmented construction. It has reduced my scrap barrel significantly.

Mark Rhodes
01-28-2005, 10:11 AM
Sweet looking bowl. Makes me wanna go buy a lathe and give it a shot. Nice job!!!!

Lou Morrissette
01-28-2005, 3:25 PM
Great tutorial, Ken. Although I'm not a turner,YET, this was very informative....and tempting. Good job.

Lou

Jeff Sudmeier
02-02-2005, 11:41 AM
Thanks for the Article Ken! Segmented bowls is something I have always wanted to try, this article will make it easier!