Curved legs for table

[Paul Ricard]

Hi guys, I would like to know how the following specific curved legs can be done?
501433
It seems that they are full 3D machined. Could it be done to bandsaw with that old trick of cutting the outline twice in two sides of a piece of wood and then
invert and glue the pieces per two, then the double results glue together?

Thanks.

[Jamie Buxton]

Yeah, bandsaw close, then good rasps to clean up and round over edges.

[Jamie Buxton]

Cut the joinery before you do the bandsawing. That gives you flat reference surfaces.

[Paul Ricard]

Thanks for the info Jamie