Flush handle drawers for router table

[Steven Woodward]

I wanted handles that were flush. Solution was to cut a relief on the back of drawer plate, using a cove bit, on the router table.

The Blum MOVENTO drawer slides work great. I got the optional rod and track to synchronize the left and right slides.

Details in video: https://youtu.be/b1VOiEMkXAs

500701


500702

500703

[Maurice Mcmurry]

Great looking work! Those slides would be a good solution for very wide and shallow drawers as discussed in a recent thread.

[Aaron Inami]

That's a very nice piece of router table furniture, much nicer than the one I'm building (though I have some very specific requirements and geared it more towards performance).

[Jim Becker]

That worked out well. Looks good. Works well. Removes the need to make or acquire some form of addon pull. Nothing sticks out to catch on clothing or workpieces, too. You even have the option to add a splash of color if you wish by putting the color on the front of the drawer box before you put the drawer fronts in place.