Scm Nova fs410 digital display problem

[Michail Kyriazanos]

Hello everyone

For some reason and without knowing for sure if somebody pushed anything I got my digital display on my scm totally screwed.

Unfortunately there is no info in the instructions manual that scm provided. I found out that by pushing - + simultaneously it accesing a setting mode and has 3 programming options.

P1 which affects display
P2 that im not sure about
P3 that you can choose the display format


Can anybody help me to calibrate it?

499832499832499833

[Jim Becker]

A person in the Minimax group distribution had a similar issue and this morning, he had this response:


I managed to figure out my issue. One of the "P" values was incorrect. I was able to dial in the setting and it is reading correctly.

I'm not familiar with the interface, but that may give you a clue.

[Michail Kyriazanos]

Unfortunately the manuals don't have a reference of the factory settings so I can't possibly know what are the proper values.

Can I have the contact info of the distributor?

[Jim Becker]

If you were in the US, I have a resource I could point you to. What you may want to do is to join the SCM/Minimax online group: groups dot io slash g slash MinimaxOwnersGroup as it's international and can likely provide you with both suggestions as well as any contact information for where you live.