John Pendery
02-11-2023, 11:39 AM
I have a 2001 Martin T20 DuoControl that needs some TLC and I’m debating which course to take. The fence motor has been removed (encoder is still in place), and has been set up to operate manually. Im trying to wrap my head around what parts are needed (aside from the obvious motor) to operate the fence. Any photos of similar era T20’s or T26’s (especially the guts of the fence) would be great if available.
Been using a digital gauge for setup, but looking to make a move towards a rebuild, or installing aftermarket digital readouts. I would obviously prefer to restore it so the DuoControl functions as intended, but realize this is the more costly route. Thanks for any feedback.
John
Been using a digital gauge for setup, but looking to make a move towards a rebuild, or installing aftermarket digital readouts. I would obviously prefer to restore it so the DuoControl functions as intended, but realize this is the more costly route. Thanks for any feedback.
John