View Full Version : Unisaw 34-802 with Unifence
Jerry Thompson
01-27-2023, 1:22 PM
I have trouble understanding the Unifence adjustment. I have poor mechanical understanding as an alert.
The fence is prone to drag along the rail on the top side. Sometimes when I adjust the screws on the fence it cures it for a bit. I have no idea what the four screws function really is.
steve swantee
01-27-2023, 5:34 PM
Do you have a manual for the fence? If not here is a link to one. It covers the basic adjustments:
https://www.manualslib.com/manual/37651/Delta-Unifence-36-902.html?page=15#manual
Jerry Thompson
01-27-2023, 8:13 PM
Thank you. My fence looks different than the one pictured in the manual. I would think they would have the same adjustment functions.
I purchased the saw in 1988.
Jerry Thompson
01-28-2023, 2:03 PM
Thank you Steve. It is up and running.
John Kananis
01-28-2023, 2:29 PM
Jerry, seems like you have to mess with the set screws every so often. Try some loctite on the threads.
steve swantee
01-28-2023, 3:12 PM
Glad it worked out for you Jerry!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.