Derek Cohen
01-04-2023, 10:29 AM
A small item, perhaps, but the MFT fence was used today as a stop to biscuit two panels together ...
https://i.postimg.cc/Fmy76QDj/1.jpg
A while back I purchased a 1/4" thick rubber mat, 1200 x 600mm, to use as an underlay when glueing up parts (it would fit the bench top here perfectly if the fence was not in the way).
https://i.postimg.cc/yB4DnNX1/2.jpg
No more concerns about getting glue on work surfaces ..
https://i.postimg.cc/pRPpb163/3.jpg
This panel, 300 x 600mm, became a fold-away extension for the bench. Folded down ...
https://i.postimg.cc/mTDkh1Rw/4.jpg
Folded up ...
https://i.postimg.cc/VzV6tskc/5.jpg
Folded down ...
https://i.postimg.cc/qJfvmmKb/6.jpg
The extension is attached with piano hinges, and secured in the up position with gate legs. I added a bolt for any fine tuning, if needed.
https://i.postimg.cc/SkVjyf0R/7.jpg
It is all perfectly coplanar ....
https://i.postimg.cc/vQxmtR4x/8.jpg
Regards from Perth
Derek
https://i.postimg.cc/Fmy76QDj/1.jpg
A while back I purchased a 1/4" thick rubber mat, 1200 x 600mm, to use as an underlay when glueing up parts (it would fit the bench top here perfectly if the fence was not in the way).
https://i.postimg.cc/yB4DnNX1/2.jpg
No more concerns about getting glue on work surfaces ..
https://i.postimg.cc/pRPpb163/3.jpg
This panel, 300 x 600mm, became a fold-away extension for the bench. Folded down ...
https://i.postimg.cc/mTDkh1Rw/4.jpg
Folded up ...
https://i.postimg.cc/VzV6tskc/5.jpg
Folded down ...
https://i.postimg.cc/qJfvmmKb/6.jpg
The extension is attached with piano hinges, and secured in the up position with gate legs. I added a bolt for any fine tuning, if needed.
https://i.postimg.cc/SkVjyf0R/7.jpg
It is all perfectly coplanar ....
https://i.postimg.cc/vQxmtR4x/8.jpg
Regards from Perth
Derek