David Zaret
12-03-2022, 4:36 PM
the minipress is probably the single worst tool in my shop for generating shavings and dust. it's effectively impossible to collect anything off of it, and after a kitchen's worth of doors, my shop is trashed.
not anymore! i decided to try the FastCap attachment for dust collection on the minipress, and after a bit of an involved install, i can honestly say that i'd pay just about anything for it. it has worked flawlessly, and i consider my collection issues on this machine to be solved.
they 3D print them, and don't keep an inventory, so it takes a bit of time to get... but it's so worth it. if you have a minipress, consider this worthwhile upgrade. kudos to FastCap for solving a tricky problem.
-- dz
not anymore! i decided to try the FastCap attachment for dust collection on the minipress, and after a bit of an involved install, i can honestly say that i'd pay just about anything for it. it has worked flawlessly, and i consider my collection issues on this machine to be solved.
they 3D print them, and don't keep an inventory, so it takes a bit of time to get... but it's so worth it. if you have a minipress, consider this worthwhile upgrade. kudos to FastCap for solving a tricky problem.
-- dz