View Full Version : Looking for an escutcheon/backing plate to match this one
Malcolm Schweizer
10-04-2022, 4:11 PM
Hello all:
I am doing a restoration and I need to find a backing plate that closely resembles this 2.5” round one with a lion on it. It does not have to be a perfect match- just close enough. I might even take a round one without the lion, but would prefer the lion. Will pay fair value plus shipping. Thank you.
487308
Paul F Franklin
10-04-2022, 7:11 PM
If you don't find one, it would be a good candidate for making a mold and casting one yourself.
Malcolm Schweizer
10-04-2022, 7:38 PM
If you don't find one, it would be a good candidate for making a mold and casting one yourself.
Ya know, that ain’t a bad idea!
Malcolm Schweizer
10-11-2022, 3:50 PM
If you don't find one, it would be a good candidate for making a mold and casting one yourself.
So, I went with your idea and made a resin cast and painted it to match. The customer couldn’t tell which was which. Thanks again for the idea.
487702
Mel Fulks
10-11-2022, 6:59 PM
An idea that resonated !
Maurice Mcmurry
10-11-2022, 7:05 PM
This needs to be in a "how to" or "how would you make this" thread as well as the classifieds!
Tom M King
10-11-2022, 7:31 PM
Brilliant!!
Since wood window sills only last a couple of hundred years even with the best of wood they had back then, I cast new ones out of concrete after making a mold off of freshly aged wood.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.