Cliff Polubinsky
09-23-2022, 5:29 PM
Pick up in Fort Wayne, IN. $575
Review from Wood Magazine:
The DELTA 17-959L 17" Laser Crosshair Drill Press features a fully adjustable, powered TWINLASER pod that projects a bright red crosshair on the workpiece at the point of bit contact. This drill press comes equipped with an industry leading 18x14" tilting table for woodworking applications, and tilts 0-90° left and right, and 0-45° forward with positive stops at 0, 45 and 90°. This will help you to position your workpiece without creating time-consuming jigs. The table has a removable insert for larger bit applications. Two T-Slots are machined into the table which allow you to accuratly and firmly secure your workpiece or use a variety of attachments and accesories. The flexible lamp provides extra light to the work surface. Sixteen speeds allow for drilling a wide variety woods, plastics and metals. This unit has a full 4-7/8" quill stroke for deeper drilling applications. This drill press has a 3/4-HP induction motor for long lasting performance and a large non-tip base for increased stability.
• Motor: 3/4 HP, 120V
• Speeds: 16 (215-2,750 rpm)
• Table Size: 18"x14"
• Table Tilt: 0-90° L–R; 0-45° Forward
• Table Insert: 3-3/4" x 3-3/4"
• Column Diameter: 3.15"
• Spindle Taper: #2 Morse Taper
• Chuck Taper: Jacobs 3
• Quill Diameter: 1-3/4"
• Quill Stroke: 4-7/8"
• Chuck Capacity: 5/8"
• Chuck to Table Capacity: 24-1/2"
• Chuck to Base Capacity: 44-1/2"
• Height: 70"
• Width: 18"
• Depth: 28"
• Weight: 238 lbs.
486643 486644 486645
486646 486647 486648
486649
Review from Wood Magazine:
The DELTA 17-959L 17" Laser Crosshair Drill Press features a fully adjustable, powered TWINLASER pod that projects a bright red crosshair on the workpiece at the point of bit contact. This drill press comes equipped with an industry leading 18x14" tilting table for woodworking applications, and tilts 0-90° left and right, and 0-45° forward with positive stops at 0, 45 and 90°. This will help you to position your workpiece without creating time-consuming jigs. The table has a removable insert for larger bit applications. Two T-Slots are machined into the table which allow you to accuratly and firmly secure your workpiece or use a variety of attachments and accesories. The flexible lamp provides extra light to the work surface. Sixteen speeds allow for drilling a wide variety woods, plastics and metals. This unit has a full 4-7/8" quill stroke for deeper drilling applications. This drill press has a 3/4-HP induction motor for long lasting performance and a large non-tip base for increased stability.
• Motor: 3/4 HP, 120V
• Speeds: 16 (215-2,750 rpm)
• Table Size: 18"x14"
• Table Tilt: 0-90° L–R; 0-45° Forward
• Table Insert: 3-3/4" x 3-3/4"
• Column Diameter: 3.15"
• Spindle Taper: #2 Morse Taper
• Chuck Taper: Jacobs 3
• Quill Diameter: 1-3/4"
• Quill Stroke: 4-7/8"
• Chuck Capacity: 5/8"
• Chuck to Table Capacity: 24-1/2"
• Chuck to Base Capacity: 44-1/2"
• Height: 70"
• Width: 18"
• Depth: 28"
• Weight: 238 lbs.
486643 486644 486645
486646 486647 486648
486649