Acoustic Guitar

[Prashun Patel]

Completed this parlor size guitar. I purchased the soundboard, but the rest was from scraps.
Top is spruce. The rest is walnut.

486497486498
486499486500
486501486502

[Maurice Mcmurry]

Lovely! The neck carving looks really nice. It all looks excellent!

[Stan Calow]

Did you make the forms for bending the sides?

[John K Jordan]

Very nice!

[Jim Becker]

Outstanding project, Prashun. I've really enjoy it, both these finished photos here and the whole project on TDPRI.

[Mel Fulks]

Beautiful “classic” guitar. If you make another one , I suggest that instead of the the flat - top tuning head ,a more traditional one be used.
Gives it more ‘gravity’ , height ,and similitude with the graceful body curves.

[Prashun Patel]

Thanks. I used the Antes plans from LMII. That called for a flat head.

Mel, This is my second acoustic. The neck is actually a Les Paul width and scale length. The thickness is also only about 3” and the radius on the top and back deviates from the plans. It was my first slotted head so I didn’t go nuts on modifying that design.


Truth be told I am really interested in experimenting with either new techniques or novel designs so unfortunately i will probably be making a few more design mistakes in the future.

Stan, yes I did make my own bending forms and molds. I steam bent the sides. I haven’t mastered the bending iron yet, but I can see how great that will be. There is something magical about being able to feel the wood give way under the iron, and then coaxing it into a bend, feeling where the bend limit is. I am working on an arch top now with a double cutaway that is going to be a challenge to bend.

[Frederick Skelly]

That's beautiful Prashun!

[David Falkner]

Beautiful work! Have you strung it up; how does it sound?

[Maurice Mcmurry]

I am continuing to enjoy looking at it and like David hope you treat us to a sound sample. The square top peg box is absolutely correct for this guitar. These are a truly Classic guitar. Parlor Guitars are not Classical guitars.

[Stan Calow]

Prashun, I had heard that walnut was difficult to bend. Did you find that to be true?

[Prashun Patel]

Stan, not particularly. My difficulties with it are more related to the fact that I was using kiln dried walnut. I did get cracking on some attempts. Soaking helps. I steam bent it.

[Jim Becker]

That's an important point, Prashun...KD lumber gets altered by the process to some extent which can make it more difficult to manipulate "away from straight".

[Maurice Mcmurry]

Rob MacKillop just posted this. A very similar looking Guitar. lovely to see and hear!

https://youtu.be/nUTUfXxDFPk