plugs for salt & pepper shakers

[John Minton]

Hello

Does anyone have a source of the plugs for the bottom of the salt & pepper shaker.

Thanks
John

[John Hart]

Here's a Nice Spot I just found: http://www.ceramicdecorandmore.com/supply/stoppers/

Welcome to the Creek John!! :)

[John Minton]

Thank you for the info. This is such a great forum. Hope I will be able to add to it.

thanks again
John

[Chris Yarish]

I git some cork plugs at Lee Valley and Home Depot.
They just don't have the longevity as rubber, nor the flush bottom capabilities.

[Ron Ainge]

I looked all over the Denver area for some type of plug for the salt and peper shakers that I made a couple of years ago as Christmas presents. I found what I wanted at the Lowes store in my area. They had both small corks as well as small plastic plugs that I thought would do the trick. I found out later that most of the seasoned turners use a top loading system that has a cap that has the holes in it to also be used as the dispenser. Craft Supply has these listed on there web page.