Keegan Shields
08-29-2022, 5:01 PM
I would like to setup some vacuum work holding blocks similar to the Festool Vac-sys but I'm not very familiar with vacuum circuits. I'd like to step on a pedal or hit a switch to release the vacuum so I can reposition the work piece.
I have a vacuum pump, tank, and vacuum switch that cuts the pump off at a preset atm level.
What else to I need? Would a pneumatic switch like this work?
https://www.amazon.com/gp/product/B07P41RSG7/ref=ox_sc_saved_image_2?smid=A37DFQ476WZ5XM&th=1
Cryptic drawings welcome!
I have a vacuum pump, tank, and vacuum switch that cuts the pump off at a preset atm level.
What else to I need? Would a pneumatic switch like this work?
https://www.amazon.com/gp/product/B07P41RSG7/ref=ox_sc_saved_image_2?smid=A37DFQ476WZ5XM&th=1
Cryptic drawings welcome!