Clip sourcing

[Brian Runau]

Building a shadow box and I need a z clip or table clip with 5/8" clearance to hold something to the back. Brass ash tray @ 4" X 6.5". Similar to this, but steel is fine.


https://www.swisco.com/Stainless-Steel-Z-Clip-7_16-inch/pd/Insert-Panel-Replacement-Metal-Clips/70-140?gclid=CjwKCAjwlqOXBhBqEiwA-hhitA8u3F3d-RHNa5-WhQAp1yoBmOfVrvcY0IH2SxjqJskv4r3o1ywhTxoCNpAQAvD_B wE

Thanks. Brian

[Tom Bender]

I make bits like that from bar stock. Sometimes need to make 2 or 3 to get a good result but learning is part of the reason I have a shop.