PDA

View Full Version : It followed me home...



steven c newman
07-20-2022, 4:59 PM
Can I keep it?

Coming back home from buying a new camera...stopped at the Local Antique Mall....$10 + Sales Tax..
483101
This is also a test of the new camera....let me know how things look..
483102
483103
And...
483104
Maybe a Millers Falls/ Goodell Pratt Co. ?

Will need a good cleaning, and a drop or 3 of oil...

steven c newman
07-20-2022, 6:22 PM
Research shows this to be a Goodell Pratt Co. No. 5-1/2 B......may start the rehab later...

Jim Davenport
07-20-2022, 7:43 PM
The original "cordless" drill.

Jim Koepke
07-20-2022, 8:13 PM
Here is the catalog page:

483106

Except for the handle it is pretty much the same as the #5-1/2 > https://sawmillcreek.org/showthread.php?291909

jtk

Stew Denton
07-20-2022, 8:32 PM
Steven,

The reason it followed you home is that it knew you were going to restore it and thus make it prettier and more functional. Can you blame it for wanting to follow you home? It was looking only at it's own self interest.

Stew

steven c newman
07-21-2022, 11:34 AM
Looking a little better...
483128
and
483129
Need to tear the chuck apart...and get the jaws re-aligned....all jumbled up, right now. Crank has the Toolsmiths logo.

Rust Hunt this morning....a fellow said to make him an offer......
483130
handed him$8, and loaded these into the car seat....a Millers Falls V-Line plane, a 6-1/4" draw knife, and a Stanley No. 51 spokeshave....will be busy in the rehab shop, today?

Stew Denton
07-21-2022, 11:40 AM
Steven,

It is not "Looking a little better," it is looking much much better. Keep us in the loop. Are you going to paint it? The back side is looking really good.

I have a chuck to work on, but it is boxed up with tons of other stuff since our move. Is a chuck fairly difficult to trouble shoot, or is it not to bad?

Stew

steven c newman
07-21-2022, 8:53 PM
Rehabs are done, for today's catch...
483154
The draw knife is a 6" by PEXTO...
483155
Stanley No. 51 spokeshave...front..
483156
and the sole..
483157
Iron has been sharpened....The No.900 Smooth plane..
483158
Sole is flat...and now rust free...
483159
Iron has a Millers Falls logo...
483160
Yet the tote has a very different logo..
483161
W.H. KIEFABER CO. of Dayton, OH.

Not too bad...for just $8?

steven c newman
07-22-2022, 1:29 PM
Plane was used, today..
483200
Diagonals to flatten...then back off the iron a tad..
483201
To smooth some Maple...have a box to build...
483202
Have plenty more to flatten and smooth..
483203
All from being resawn earlier...

Trying to figure out...$8 divided by 3 =? ~$2.66 each?

Jerry Olexa
07-24-2022, 11:28 PM
Hard to pass on that..,...