Tripple Interlocking rings - The Hard Way - On A Goblet

[Bill Stevener]

Hi Gang,

Rich Stewart posted a thread with a Question about the manner in which interlocking rings are accomplished on the stem of a goblet. He received two very good answers.

Finishing this one this evening, I thought when Rich finishes his first challenge, he may wish to try this one.

Really have to get the lathe up to warp speed to set the upper ring.

The wood is local wild Chery and is 2-3/4"h x 1-3/8"w.

Something quite large for me lately. :D


Bill.>>>>>>>>>>>>>>>:)

[Rich Stewart]

Jeez!:eek: :confused: You really goofing my mind up now.

[Dick Parr]

That is big for you Bill, but looks just a great. Nice job.;)

[Robert Mickley]

WOW!! Bill that is cool!! ;)

[Gary Max]

But it won't hold wine-----looks great Bill----I had to show it to the wife.
When I told her how you where doing it---her response was that she already had a lot of pratice breaking the rings. Of course now she will have to try Captives

[John Hart]

What a cool departure from the standard interlock Bill!!!! You are an artist...maybe even a poet. ;) :)

[Michael Stafford]

I am just a plain ole country boy but something doesn't seem quite right here. You must have some kind of fancy schmancy lathe that turns in multiple axes all at the same time to be able to do stuff like that:confused: :p ....Mine just turns things round;) .... sometimes.

[Jim Dunn]

I am just a plain ole country boy but something doesn't seem quite right here. You must have some kind of fancy schmancy lathe that turns in multiple axes all at the same time to be able to do stuff like that:confused: :p ....Mine just turns things round;) .... sometimes.

Round huh?? That must be my problem:confused: mine goes kinda squarish:D

Nice piece of craftmanship Bill, but it's wayyyyyy to big for the itty bitty bunch to get excited about:p

[John Miliunas]

Good grief! I thought keeping up with the "Jones's" was hard, but this is getting ridiculous! :eek: Keep an eye out on the classifieds...There may be one or two lathes for sale there real soon! :mad: That piece is really way out there! What an absolutely imaginative piece, Bill! Well done, my friend! :) :cool:

[Mark Singer]

Bill your twisted;)I mean that in a good way! Great!

[Bernie Weishapl]

All I can say is I probably won't catch up in my lifetime. Great work Bill.

[Keith Burns]

Mr. Bill, you definately give us all something to aspire to:) :)

[Ernie Nyvall]

That aint right Bill... nope, just a right atall.

Ernie

[Andy Hoyt]

Oh No! Mr. Bill!

Stevener strikes a mighty blow, yet again

[Bruce Shiverdecker]

YOU BAD, BILL!

And I'm jealous!

Bruce

[Jim Ketron]

Nice Goblet Bill!

[Curt Fuller]

That's one cup that won't runneth over! Maybe out the bottom and down into you lap though.;)

I wonder Bill, where do you get these ideas, were you a child of the '60's?

[Dennis Peacock]

Very nice Bill!!!!!! You always amaze me at what all you can do on that lathe of yours. :D

[Bill Stevener]

Hi All, just wanted to say thanks to everyone that stoped to take a look,
just a fun thing to do.

Curt, the '60's were great, however the '70's were ever better. :D

Bill.>>>>>>>>>>>>>>>>>>>>>:)

[Andy Hoyt]

....Curt, the '60's were great, however the '70's were ever better. :D Bill.>>>>>>>>>>>>>>>>>>>>>:)

I agree, I think. I remember the sixties as though shrouded in a strange haze. I don't remember the seventies at all. I'm told this is a good thing.