$6 Friday morning

[steven c newman]

After a rain storm rolled through...West Liberty, OH. still had their village wide garage sales...I had $6.76 in "Mad Money"...came back home with $0.76 left over..
479423
That $2 vise might come in handy. That $0.75 Blue Grass 2" wide chisel might find some use...Bevel square will need some clean-up...3 bits were a package deal, along with..
479424
That Stanley Rule &Level Co. No.8, also marked for the ORD. Dept. USA ( United States Army)$0.75 marking knife?

And..
479425
Un-opened pack of 15 sheets...$0.25

The Boss bought a Phillips DVD player ( not BluRay) with remote..$10..

Not too bad of a morning?:D They will also be running tomorrow, weather permitting...

[steven c newman]

saturday morning...went back down to see what I missed....town was PACKED with people...to the point you almost HAD to park somewhere and continue on foot...spent $3....on 2 items..
479450

This is a Rust Hunt.....
479451
Chisel is from Craftsman, and is a 3/4" wide. The block plane? Will know more once it comes out of the PBblaster soak...

[steven c newman]

Appears to be by Sargent, sold by Sears as a Dunlap....under the cap iron it is marked as a 306/307.....on the base, behind the ramp of the mouth opening, it is marked as a 217-16

Iron is marked as DUNLAP APPROVED BL 619. 3701

new paint job after all the rust has been removed.....iron is going to take a bit of work to sharpen up...knob bolt cleaned of rust, and given a drop of oil to stay that way. Knob has been given an oil finish to refresh it..Plane's base is 7" long.

Will clean up the chisel later...maybe this evening...

[steven c newman]

Rehab of a Block plane...
479518
And..
479519
and..
479520
According to this stamp in the base...Number is a 217-16....Hmmm
Sole?
479521
It is good enough for a Block plane....

[steven c newman]

Last of the Rust Bunnies have been sent away...
479628
3 drill bits, and the 3/4" Craftsman chisel....
479629
Well, what do you know...they do fit the drill...Stanley No.8

Wondering IF that is the correct angle for the 2 metal drilling bits...or, are they set up for wood...

Chisel had a bad bevel....will correct and sharpen..later.


Honey-do task this morning..turned out badly..
479630
Was wondering why those two fingers wanted to stick together....