Need source for brass screws

[Mike Henderson]

I'm looking for some #4 Philips head brass screws. I'd like 5/16-inch length, but I can do with 1/4 if I have to. 3/8 is too long.

I've found slotted head 1/4" screws but no Phillips head. I know they're available because Brusso hinges come with Phillips head brass screws (a bit longer then 5/16").

I've looked in a number of places but no luck so far. I've tried McFeely and Lee Valley and a few other places.

Anyone know of a source?

Mike

[Gary Ragatz]

I usually use Bolt Depot for brass screws, but they don't have them that short. This place (https://www.fastenere.com/wood-screws) has them, but I have no experience with the company.

[Patrick Varley]

I'm a sucker for McMaster. Not the cheapest, but perhaps the best website design on the internet and next day delivery.

Screws, Number 4 Size, 1/4" Long

https://www.mcmaster.com/92114A106

[Jamie Buxton]

D Lawless offers 5/16" Phillips flat head brass plated screws in #2 and in #3 sizes. https://www.dlawlesshardware.com/flat-head-screws.html

[Mike Henderson]

I'm a sucker for McMaster. Not the cheapest, but perhaps the best website design on the internet and next day delivery.

Screws, Number 4 Size, 1/4" Long

https://www.mcmaster.com/92114A106

Thanks. I don't know why I didn't think of McMaster-Carr. I put an order into them.

Mike

[Mike Henderson]

I usually use Bolt Depot for brass screws, but they don't have them that short. This place (https://www.fastenere.com/wood-screws) has them, but I have no experience with the company.

Thanks. I went to their site and one good thing about them is the free shipping.

Mike

[Mike Henderson]

D Lawless offers 5/16" Phillips flat head brass plated screws in #2 and in #3 sizes. https://www.dlawlesshardware.com/flat-head-screws.html

They were out of stock with the #3. Didn't look at the #2.

Mike

[Andrew Hughes]

Mike Book mark this place the screws are good small quadrant hinges are good. I think some of the hardware sold at Rockler is from this place. https://craft-inc.com/

[Mike Henderson]

Mike Book mark this place the screws are good small quadrant hinges are good. I think some of the hardware sold at Rockler is from this place. https://craft-inc.com/

I sure will, Andrew. They really carry a lot of stuff. Thanks!

Mike

[Tom Blank]

Do you have an Ace Hardware nearby? The larger store near me has an extensive stock of wood and machine screws. They have steel and brass round and flat head wood screws down to #2. All are available by the box or individual pieces.

Tom

[Mike Henderson]

I ordered those screws from McMaster-Carr yesterday about 4pm. They arrived today about noon - with standard shipping. That's really fast. Of course, the screws didn't weigh very much.

Mike

[Vince Shriver]

Thanks, Andrew - great info.