Swivel stand for positioning vacuum nozzle

[Jim Barstow]

I want to set up dust/chip collection for my mortiser. What I need is something that allows me to position a vacuum nozzle close to where the mortise is being cut. I envision a fitting that can be raised/lowered/swiveled that takes a vacuum hose on one side and a nozzle on the other. Although I could make my own with a combination of 3D printing and wood, someone must make something like this. I’ve tried Rockler/Woodcraft/etc with no luck. Anyone know of something like this?

[John Kananis]

The former may work, the latter you can build.

https://www.rockler.com/dust-port-for-drill-press-fence?country=US&sid=V91040&promo=shopping&utm_source=google&utm_medium=cpc&utm_term=&utm_content=pla&utm_campaign=PL&gclid=Cj0KCQjwvLOTBhCJARIsACVldV13qj0shhj0JId_gnA9 h4aEVFQbbu2T_PEUC4wa1KK90-PLBsnccGcaAr4eEALw_wcB

https://www.google.com/search?q=drill+press+dust+collection&sxsrf=ALiCzsZUbY5Yc9U_6b3c6H4Fk7XQ5lNpPQ%3A1651270 074096&ei=umFsYt7BBbCdptQP4duZ-A8&oq=drill+press+dust&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYADIFCAAQgAQ yBQgAEIAEMgUIABCABDIFCAAQgAQyBQgAEIAEMgUIABCABDIGC AAQFhAeMgYIABAWEB46BwgjELADECc6BwgAEEcQsAM6BwgjEOo CECc6DQguEMcBEK8BEOoCECc6BAgAEEM6CAgAEIAEELEDOggIA BCABBDJAzoFCCEQoAFKBAhBGABQyxFY1ERgmE5oBHAAeAGAAfw BiAHeDJIBBTAuNi4zmAEAoAEBsAEPyAEJwAEB&sclient=mobile-gws-wiz-serp#scso=_4VBtYrWJIPeYptQPspGW0A83:88&oshopproduct=pid:9608078096024269851,oid:960807809 6024269851,iid:4678984939150985172,pvt:hg&oshop=apv

[Jamie Buxton]

https://www.ptreeusa.com/dust_drill_press.html

[Bob McBreen]

I use this from Amazon: Loc-Line 80813 Shop Vacuum Kit, 2.5", Blue/Orange https://www.amazon.com/dp/B01LYEMPY1/ref=cm_sw_r_cp_apan_i_ESRSY68MQ5YJ5V9P83J3

[Jim Barstow]

I use this from Amazon: Loc-Line 80813 Shop Vacuum Kit, 2.5", Blue/Orange https://www.amazon.com/dp/B01LYEMPY1/ref=cm_sw_r_cp_apan_i_ESRSY68MQ5YJ5V9P83J3

this looks pretty good. i still have to make a stand/holder but it could be much simpler

[Patrick Varley]

this looks pretty good. i still have to make a stand/holder but it could be much simpler

I use this as well. If you have access to a 3D printer (or know someone who does) there is a guy who designed a few tool mounts.

https://www.printables.com/model/181428-drill-press-clampbracket-3-post-for-loc-line-25-va

https://www.printables.com/model/181426-clamping-right-angle-bracket-12-dia-rodshaft-for-l

[ChrisA Edwards]

I used the Loc-Line on my PM719T


https://www.youtube.com/watch?v=jIJWNBAUtyk

[Malcolm McLeod]

I used the Loc-Line on my PM719T


https://www.youtube.com/watch?v=jIJWNBAUtyk

+1 for my drill press; coupled to the DC w/ Rockler 4" x 2-1/2" adapter. Caveat for Mr. Barstow: the Loc-Line will stay where you put it, but it is not as flexible as you might think. I used all the 'links' in the kit in a single run to provide ample reach and flexibility.