Doug Evans
07-19-2003, 9:36 PM
Hi Folks:
Doug again.
This is a first cut at an agenda and some timing. I need to get some feedback here about who wants what in terms of Topics for speaking, are the days right?, etc. We have a couple of slots open and Ben and I will try to put together a list of topic options. We do not want to burden our participants -this is a great opportunity to interact - so dont waste it. Once we have a somewhat more solid agenda, we can negotiate and prepare the associated costs. To give people an idea, we have about twenty interested people already from all over NA.
Wednesday October 1, 2003
Folks arrive (Congregate at Rose & Thistle)
Get those that need feeding out to places to feed…
6:30 p.m. Orientation (Wine and Cheese/Antique Tool Display from a number of collections)
7:00 p.m. Tool Tour of England and Scotland (Places to go Guide/Slide Show)
7:40 p.m. Break
8:00 p.m. Tool Tour of England and Scotland (Places to go Guide) Part 2
8:40 p.m. Mix n Mingle (Rob Morris and Tim, guitar and vocals)
9:30 p.m. A bit of Scottish Folklore, a Robert Burns reading, a fine single malt
10:00 p.m. Adjourn
Thursday October 2, 2003
(8:00am maybe earlier for fly fisherpersons – 5:00 p.m.)
Plane Building or Fly Fishing (Maybe down in Ayr, thus could come back through our shop and the tail end of the planemaking)
Dinner and Speaker (5:00 p.m. – 10:00 p.m.) at The Copper Kettle.
Friday October 3, 2003
Woodstock Wood Show - Opening
Come back from Woodstock along 401 to Ayr. Have dinner in Ayr
Afternoon Skills Workshop
Friday Night at The Mill Race, Elora Mill
Saturday October 4, 2003
Travel to Tyrone Mill (9:00 a.m. to 3:00 p.m.)
Lunch at Tyrone Mill
I will try to arrange for a blacksmithing demo at The Blacksmith Shop in Tyrone. Perhaps a little Blacksmithing for amateurs discussion too.
Dinner at The Breadalbane and close out meeting.
Sunday October 5.2003
Tools of The Trades Show (10:00 a.m. to 12:00 p.m., Toronto) optional
This should be on most folks way home. We will help get people to the A/P.
Let me know how this sits with everyone.
Regards,
Doug
Doug again.
This is a first cut at an agenda and some timing. I need to get some feedback here about who wants what in terms of Topics for speaking, are the days right?, etc. We have a couple of slots open and Ben and I will try to put together a list of topic options. We do not want to burden our participants -this is a great opportunity to interact - so dont waste it. Once we have a somewhat more solid agenda, we can negotiate and prepare the associated costs. To give people an idea, we have about twenty interested people already from all over NA.
Wednesday October 1, 2003
Folks arrive (Congregate at Rose & Thistle)
Get those that need feeding out to places to feed…
6:30 p.m. Orientation (Wine and Cheese/Antique Tool Display from a number of collections)
7:00 p.m. Tool Tour of England and Scotland (Places to go Guide/Slide Show)
7:40 p.m. Break
8:00 p.m. Tool Tour of England and Scotland (Places to go Guide) Part 2
8:40 p.m. Mix n Mingle (Rob Morris and Tim, guitar and vocals)
9:30 p.m. A bit of Scottish Folklore, a Robert Burns reading, a fine single malt
10:00 p.m. Adjourn
Thursday October 2, 2003
(8:00am maybe earlier for fly fisherpersons – 5:00 p.m.)
Plane Building or Fly Fishing (Maybe down in Ayr, thus could come back through our shop and the tail end of the planemaking)
Dinner and Speaker (5:00 p.m. – 10:00 p.m.) at The Copper Kettle.
Friday October 3, 2003
Woodstock Wood Show - Opening
Come back from Woodstock along 401 to Ayr. Have dinner in Ayr
Afternoon Skills Workshop
Friday Night at The Mill Race, Elora Mill
Saturday October 4, 2003
Travel to Tyrone Mill (9:00 a.m. to 3:00 p.m.)
Lunch at Tyrone Mill
I will try to arrange for a blacksmithing demo at The Blacksmith Shop in Tyrone. Perhaps a little Blacksmithing for amateurs discussion too.
Dinner at The Breadalbane and close out meeting.
Sunday October 5.2003
Tools of The Trades Show (10:00 a.m. to 12:00 p.m., Toronto) optional
This should be on most folks way home. We will help get people to the A/P.
Let me know how this sits with everyone.
Regards,
Doug