D4 case ?

[Mike Whitman]

So, I mentioned I had some questions to ask, and was happily told to ask away..
Working my way from up from the bottom of my list, let's start with question #4,781,632, if that's ok with you all. :)

I have a pile of tools that I purchased years ago, then never had the chance to put to use. One of them being a Leigh D4. I'd like to make a case for the jig, and have that be the first project I make with the D4. Has anyone here made one themselves, or know of a plan ? I would prefer to just follow someone else's plans for now, rather than also design it. Requirements I would like are to be able to store a set or two of the fingers templates, should I aquire any, and any other hardware the jig normally needs.

There is a rumor going around that Leigh's manual has a plan in it. Mine does not, and the kind folks at Leigh confirm this is not the case as well.
There is also a link here (http://www.newwoodworker.com/d4case.html), but that's not exactly what I'm looking for..
I vaguely remember, either a magazine article, or a webpage about one, but I'm not sure. The Alt-Timers I keep hearing about kickin in I guess..

So, to put it simply, call it laziness, or lack of experience, or whatever you wish, I'd like to 'borrow' a plan, if anyone has made something similar.

Thanks in advance !
Mike
(no pictures yet.. move along, nothing to see...)

[Phil Winn]

#1.

www.thewoodshop.20m.com/graphics/dovetail_stabilizer_fence.pdf (http://www.thewoodshop.20m.com/graphics/dovetail_stabilizer_fence.pdf)

(the spaces are UNDER-SCORES...)
(....................dovetail_stabilizer_fence.pdf )

#2.

www.thewoodshop.20m.com/pc4112_p3.htm (http://www.thewoodshop.20m.com/pc4112_p3.htm)

(...........pc4112_p3.htm)

Phil

[Sparky Paessler]

here is one I made with and for my D4 jig.

http://www.sawmillcreek.org/showthread.php?t=4993

[Mike Whitman]

Thanks for the links guys, and all the PM's too !!!

Time to draw up some sort of plan...