View Full Version : Caster for Jet 1642
Steve Nix
03-21-2022, 6:44 PM
Anyone have a 1642 with mobile caster wheels, looking for suggestions. Thanks
Sam Force
03-21-2022, 8:11 PM
Look at Carl Holmgren on YouTube
Richard Coers
03-22-2022, 11:31 AM
I bought a used 1642 that had the foot/caster combo mounted to the lathe legs. It made it way too tall for me. I took them off and the lathe just sits in one place in my shop. I'd suggest you seriously consider the height when choosing and I would recommend a mobile base.
Edward Weber
03-22-2022, 12:58 PM
Mine is on 3" double locking castors and works fine for me. It does put the spindle height at about 48".
https://www.woodcraft.com/products/3-caster-double-locking-swiveling-with-1-2-threaded-spindle?gclid=Cj0KCQjw5-WRBhCKARIsAAId9FmJykiETBi2-gKfBY63jf3TugYczKWMb9CZEVWRUq7UcfjFmphuXvkaAsijEAL w_wcB
Dick Mahany
03-26-2022, 5:25 PM
I built retractable casters for mine about 15 years ago. Still going strong. I documented the build in a PDF if interested including the cam handle profile. The casters are only for mobility and storage and are never in use when turning, so height change isn't of concern.
476568
476569
476570
Gregg Feldstone
03-28-2022, 9:36 PM
Can can you please send me the PDF? I’d like to try this for my 3520
Brice Rogers
03-29-2022, 3:45 PM
Dick Mahoney, thanks for posting. What is the black piece under your cam? Metal? Plastic?
Dick Mahany
03-30-2022, 7:52 AM
Can can you please send me the PDF? I’d like to try this for my 3520
Sent a PM.
Dick Mahany
03-30-2022, 7:55 AM
Dick Mahoney, thanks for posting. What is the black piece under your cam? Metal? Plastic?
The black piece is a hard black plastic that I originally placed to reduce friction. In hindsight, I should just have used a piece of high pressure laminate which would be simpler and easy to replace.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.