Cubitron PSA sanding disc holder and discs

[Stephen Massman]

I am looking for some help finding some 3" disc holders. I bought this setup from WoodturnersCatalog several years ago and finally need some more disc holders. I would like some discs also. These used to be described as the "Cadillac" of sanding discs. I do know they last a long time and really help with initial bowl sanding grits.

Example disc holder:
https://www.woodturnerscatalog.com/p/31/5076/apprentice-PSA-Disc-Holder?s=8234f

Example sanding discs:
https://www.woodturnerscatalog.com/p/31/5390/3m-3-Inch-Cubitron-Sanding-Discs-5-Pack?s=8249

I did email WoodturnersCatalog, but thought the wealth of knowledge here may know where to a find similar type of holder and discs.

Does anyone know of a supplier for similar quality?

Thanks,
Steve

[Steve Eure]

WoodturnersWonders has disc and holder/mandrels. Check Klingspor also.

[Reed Gray]

I get my abrasives through VinceswoodNwonders. I believe his are over sized, but he may have 3 and 2 inch sizes as well. His pads and mandrills had 'micro' hooks, not sure about Woodturnerswonders.

robo hippy

[Dwight Rutherford]

Try here for “Cubitron” products:
https://taytools.com/products/3m%E2%84%A2-710w-ztract%E2%84%A2-sanding-discs-cubitron-ii-%E2%84%A2-hookit%E2%84%A2-hook-and-loop-attachment-clean-sand-multi-hole-dust-extraction-3-mil-film-backing

[Pat Scott]

The Sanding Glove sells 3M Cubitron Ceramic discs and Norton Dry Ice.

It's hard to beat the FilmTek discs at Vinces. I think they are the best value for the price. I bought some in 1", 2", 3", and 5". They are film backed so very flexible, the velcro is super strong, consistent grit size and scratch pattern thru all grit sizes, and long lasting. For comparison you can buy 50 FilmTek for $9 whereas 50 3M Cubitron are $52!

[Stephen Massman]

thanks for all the help. Hope it helps others also.