Large sawstop sliding table

[Trey Isbell]

Has anybody mounted the large sawstop sliding table to any other brand saw. I have a jet cabinet saw just wondering if it could be made to work.

[Mike Kees]

Trey ,I just googled that sliding table. Looks just like the Excalibur that used to be made. I would say it it exactly the same. I used to have one of those (Excalibur) mounted on a Unisaw. They mount onto your saw through the bolt holes for the left extension wing. My guess is it would work as is. The worst case scenario would be having to drill a couple holes in the angle iron mounting piece.