View Full Version : Router collet
Bruce Volden
03-06-2022, 10:23 AM
I have an old Milwaukee mdl 5650 3.5 horse router that came w/a 1/4" collet.
I want to find a 1/2" collet and am having no luck! If the threading is the same I could buy
another mdl # collet.
Do you think it's feasible??? Thanx
Bruce
Jim Koepke
03-06-2022, 10:56 AM
There are some listed on ebay. One mentions checking with the Milwaukee website to make sure it is the right part number
jtk
Edward Weber
03-06-2022, 4:24 PM
https://www.milwaukeetool.com/Products-Repository/North-America/Accessories/Miscellaneous/Chucks-and-Collets/48-66-1010
Hope this helps
Marty Gulseth
03-07-2022, 12:03 AM
I recently needed to go the other way (1/2” to 1/4”) for my PC 7518. I’ll look for a link to my post and responses, but if you’re in a hurry you can likely find the thread by searching on “collet”. Several third party choices, mine was inexpensive and seems to work just fine.
EDIT: Found “my” thread - hope this helps, best wishes! https://sawmillcreek.org/showthread.php?295606-1-4-inch-collet-(or-adapter)-for-PC-7518
Bill Dufour
03-07-2022, 1:15 AM
Is the millwaukke made by PC? I assumed it was made by millwaukee?
Bill D
Keith Outten
03-07-2022, 7:24 AM
This one fits the 5300 call them and ask if it also fits you router.
https://www.precisebits.com/gateways/ColletsNutsHome.htm
Jim Becker
03-07-2022, 10:43 AM
Is the millwaukke made by PC? I assumed it was made by millwaukee?
Bill D
No. They are similar in size, but...and PC is no longer in the router market as a manufacturer, too.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.