Phillip Mitchell
02-23-2022, 3:30 PM
I stumbled across a pretty good deal on a pair of smaller Autoquip lift tables. 1500# capacity with 19x38 tables, $400 for both. Neither one has the hydraulic motors that used to be on it. Looking for some advice on replacement motor options that will get the job done.
I came across this site first (scroll down past the first 4 results) - https://www.vevor.com/collections/hydraulic-power-unit?sort_by=price-ascending
What I’m looking for is a 120 or 240v / 60 hz hydraulic pump/ motor that has the wired remote control included and already wired in. It seems like only the 12v versions have the remote and the 240v versions have a lever that is on the motor itself. This is probably fine for a car lift, etc but inconvenient for a lift table where this motor will be tucked away under the scissor lift area. Not really experienced in the specific area beyond what I have seen, which isn’t much...wondering if I’m missing something or there is another good source for these type of motors and remotes for this application.
I have a larger Bishamon 2k capacity lift table that I love and use everyday (last photo.) It has a 2 hp single phase 240v pump motor on it with a wired remote control for up / down controls. It looks just like some of the units above but not 12v powered.
Thanks for any help!
I came across this site first (scroll down past the first 4 results) - https://www.vevor.com/collections/hydraulic-power-unit?sort_by=price-ascending
What I’m looking for is a 120 or 240v / 60 hz hydraulic pump/ motor that has the wired remote control included and already wired in. It seems like only the 12v versions have the remote and the 240v versions have a lever that is on the motor itself. This is probably fine for a car lift, etc but inconvenient for a lift table where this motor will be tucked away under the scissor lift area. Not really experienced in the specific area beyond what I have seen, which isn’t much...wondering if I’m missing something or there is another good source for these type of motors and remotes for this application.
I have a larger Bishamon 2k capacity lift table that I love and use everyday (last photo.) It has a 2 hp single phase 240v pump motor on it with a wired remote control for up / down controls. It looks just like some of the units above but not 12v powered.
Thanks for any help!