Bench vise has a "vice"

[steven c newman]

Where IF wooden jaws won't get the tasks done...:mad:
472848
We have ways.....it was The Boss's GreatUncle's little shop vise...:cool:
472849
So, now it is in MY shop, to be used when need be....:D

Then it can be stored over on a shelf, until the next time it's needed....oh, and, eat yer Wheaties BEFORE you try to move this thing....:eek:

[Jim Koepke]

Before getting this vise set up:

472854

There were a couple of vises mounted on 2Xs to fit in my end vise.

My saw vise is still used in the end vise:

472856

Great way to hold things the wood faced vise can't handle.

jtk

[Phil Gaudio]

Great minds think alike:
https://i.postimg.cc/cLHqtn5d/IMG-2903.jpg (https://postimg.cc/w7S4S7pr)

[Kevin Foley]

I thru-bolt a metalworking vise to a piece of 1x4 so I can hold it in my ww vise = working in house instead of the cold garage.

472933

[Richard Line]

I don't think a bench vice embracing a metal working vice is a 'vice'. Mine has been doing it for years.

[Jim Koepke]

I don't think a bench vice embracing a metal working vice is a 'vice'. Mine has been doing it for years.

I do like to keep my vises in line and my vices a little naughty.

jtk

[Tom Bender]

Here's mine. It clamps to the split top.

473162

[Russell Nugent]

That may be the prettiest vise I've ever seen.

[Anuj Prateek]

I have mine mounted on a piece of wood. I drilled 3 holes to match dog holes in bench corner. I have three oak dowels with plumbing pipe cap on one end. To use the vise l, I secure it to bench by these dowels. Rest of the time vise stays in storage.