View Full Version : Bench vise has a "vice"
steven c newman
01-31-2022, 12:38 PM
Where IF wooden jaws won't get the tasks done...:mad:
472848
We have ways.....it was The Boss's GreatUncle's little shop vise...:cool:
472849
So, now it is in MY shop, to be used when need be....:D
Then it can be stored over on a shelf, until the next time it's needed....oh, and, eat yer Wheaties BEFORE you try to move this thing....:eek:
Jim Koepke
01-31-2022, 3:09 PM
Before getting this vise set up:
472854
There were a couple of vises mounted on 2Xs to fit in my end vise.
My saw vise is still used in the end vise:
472856
Great way to hold things the wood faced vise can't handle.
jtk
Phil Gaudio
02-01-2022, 8:19 AM
Great minds think alike:
https://i.postimg.cc/cLHqtn5d/IMG-2903.jpg (https://postimg.cc/w7S4S7pr)
Kevin Foley
02-01-2022, 12:58 PM
I thru-bolt a metalworking vise to a piece of 1x4 so I can hold it in my ww vise = working in house instead of the cold garage.
472933
Richard Line
02-01-2022, 9:33 PM
I don't think a bench vice embracing a metal working vice is a 'vice'. Mine has been doing it for years.
Jim Koepke
02-02-2022, 1:42 AM
I don't think a bench vice embracing a metal working vice is a 'vice'. Mine has been doing it for years.
I do like to keep my vises in line and my vices a little naughty.
jtk
Tom Bender
02-04-2022, 1:46 PM
Here's mine. It clamps to the split top.
473162
Russell Nugent
02-05-2022, 12:02 AM
That may be the prettiest vise I've ever seen.
Anuj Prateek
02-05-2022, 12:56 AM
I have mine mounted on a piece of wood. I drilled 3 holes to match dog holes in bench corner. I have three oak dowels with plumbing pipe cap on one end. To use the vise l, I secure it to bench by these dowels. Rest of the time vise stays in storage.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.