Your "Ah Ha" Moments

[fred everett]

My TS is down, so I'm looking to do a couple quick hitter things in the shop. I have a few available hours to tinker. Have you had any recent, or not recent "ah ha" moments that improve your woodworking, shop or workflow? Wouldn't want to build a workbench or anything....more casual smaller things that make life easier.

[Bill Dufour]

Wax jointer, planer, shaper, tablesaw tables. Wax jointer/shaper fence. Clean saw blades as needed. Shovel out dust under those machines. Clean windows to let in more light.
Bill D

[fred everett]

Wax jointer, planer, shaper, tablesaw tables. Wax jointer/shaper fence. Clean saw blades as needed. Shovel out dust under those machines. Clean windows to let in more light.
Bill D

All else is good but thanks for reminding me on the window. I only have one and it's really bad!

[Ron Citerone]

Sharpen chisels and block plane! :)

[Ralph Okonieski]

I have a single stage dust collector with Thein baffle and filter instead of the cloth bag. I have had it quite a few years now and had some concerns about the filter being clogged even though had cleaned it recently. I was milling some walnut and managed to fill the bottom bag and put a lot in the filter as well. This led to the cleaning that I mentioned. Anyway, after the filter cleaning the dust collector just was not pulling very well. Had it in my mind that the filter may be done. I replaced the filter with the original bag that had never been used. Still disappointment in the suction. Finally decided to tear apart the ductwork. Aha. Sure enough, some long thin pieces had wedge in an elbow and blocked it. After cleaning the duct, collector works as good as new. Yes, I feel pretty silly thinking it was the filter but sometimes get fixated on something when should be more open-minded.

[fred everett]

Sharpen chisels and block plane! :)

My banger cheapo glue scrap plane needs attention....put it on the list to tomorrow!


I have a single stage dust collector with Thein baffle and filter instead of the cloth bag. I have had it quite a few years now and had some concerns about the filter being clogged even though had cleaned it recently. I was milling some walnut and managed to fill the bottom bag and put a lot in the filter as well. This led to the cleaning that I mentioned. Anyway, after the filter cleaning the dust collector just was not pulling very well. Had it in my mind that the filter may be done. I replaced the filter with the original bag that had never been used. Still disappointment in the suction. Finally decided to tear apart the ductwork. Aha. Sure enough, some long thin pieces had wedge in an elbow and blocked it. After cleaning the duct, collector works as good as new. Yes, I feel pretty silly thinking it was the filter but sometimes get fixated on something when should be more open-minded.

Good catch. Sometimes we over think. Common in IT.....techs come looking for a new network card. I ask, did you check the cable?

[Doug Garson]

Clean your saw blades or send them out for sharpening if required.

[Carl Beckett]

Organizing (if you are like me). How much time is spent 'looking' for something?

Recently got some harbor freight organizing bins and sorted all my small screws, nuts, hinges, etc etc. Not only can I now find things easily, it made space in my storage cabinets.

Sort some tools and consider letting go of items you havent used in a long time. Ditto with some lumber hoarding.

A cleaner more organized shop will clear the mind.

[John TenEyck]

Order supplies that are low or you'll soon need.

John

[Thomas Wilson]

I am upgrading fluorescents to LED’s.

[Frederick Skelly]

I am upgrading fluorescents to LED’s.

Good move. I did that a couple years back during a lull.

[fred everett]

Clean your saw blades or send them out for sharpening if required.

Blades are all ready to rock. Thanks


Organizing (if you are like me). How much time is spent 'looking' for something?

Recently got some harbor freight organizing bins and sorted all my small screws, nuts, hinges, etc etc. Not only can I now find things easily, it made space in my storage cabinets.

Sort some tools and consider letting go of items you havent used in a long time. Ditto with some lumber hoarding.

A cleaner more organized shop will clear the mind.

Couldn't agree more. I literally forced myself to organize 2yrs ago and have mostly stayed with using a "clean as I go" method. It's nice to clear benchtops and not work with piles of items around me. I does take discipline though.


Order supplies that are low or you'll soon need.

John

In need of gloves, mixing sticks and plastic razor blades thanks.


I am upgrading fluorescents to LED’s.

I did this awhile back, but one at a time. This left me with 3 different colors/temps in my 7 fixtures.....I have to circle back and resolve this.

[fred everett]

Accomplishments....

-Cleaned window
-Sharpened beater plane
-Broke down Record vise, jointed all sides of maple jaws, cleaned and lubed
-MacGyver'ed internal wiper blade of sorts for dust collector bucket window (too cheap to buy a fill indicator)
-Got Alexa out of my way.....hung it from the ceiling
-Insulated louvered exhaust fan.....built easily removable foam board box to close it in
-Ordered supplies

[Aaron Rosenthal]

Yup, as soon as it warms up a little I'll be re-configuring the lighting in the "shop". Got 2 new fixtures at Costco the other day, so consolidating makes sense - and better lighting, too.
Also planning to order & make the Shophacks dust collector.

[Alan Lightstone]

-When you think you have enough lights - add more.
-When you think you have sufficient air cleaning - add more.
-When you wonder when you last changed the filter on your respirator - change it, and put the date on it this time.

[Dave Zellers]

And when you run out of money- add more.

:cool:

[fred everett]

-When you think you have enough lights - add more.
-When you think you have sufficient air cleaning - add more.
-When you wonder when you last changed the filter on your respirator - change it, and put the date on it this time.

Ha, I haven't worn my respirator since I added the shop made 4x FPR10/4000 cfm cart....Dylos says I did an "excellent" job on that project. Prob my only "excellent" project to date.....but determined I am lol