Corey Hallagan
01-16-2006, 12:13 PM
No pictures..sorry, unhooked the old computer to move it and don't have it up and running yet. The camera only works with the old PC. Anyway, decided to go down and dink around with the lathe. Fixed the lock down on the banjo, the nut was to tight, not enough travel to lock it down. Works fine now.
So I chucked up a piece of walnut and decided I was going to be in charge today not the wood. I wanted to make a nice dowel. Roughed it out just fine with the big gouge, I like that big gouge :) then I stepped it up and turned some more with a spindle gouge and go it nice and round and was going to call it good, but I started looking at that skew. Laid it down and was able to immediately get it to start paring off the wood, No master by far but I was able to control it and finished the dowell up with it and it wouldn't need any sanding. I was happy and I called it good. Next weekend I will make and dowell and then I will try my hand at making another dowell and making controlled beads. Got to travel the rest of the week.
Corey
So I chucked up a piece of walnut and decided I was going to be in charge today not the wood. I wanted to make a nice dowel. Roughed it out just fine with the big gouge, I like that big gouge :) then I stepped it up and turned some more with a spindle gouge and go it nice and round and was going to call it good, but I started looking at that skew. Laid it down and was able to immediately get it to start paring off the wood, No master by far but I was able to control it and finished the dowell up with it and it wouldn't need any sanding. I was happy and I called it good. Next weekend I will make and dowell and then I will try my hand at making another dowell and making controlled beads. Got to travel the rest of the week.
Corey