Jointer blade sharpening in Atlanta...

[Steve Sharp]

Good evening, Any Atlanta wood workers have a suggestion on where I might get my DJ-20 blades sharpened in Atlanta? I know about Keen-Edge just looking to see if they are my best bet. Tried using the search feature on this forun w/o any luck on this subject.
Thanks, Steve

[Terry Beadle]

Hello Steve. I'm from Marietta and only the suggestion of contacting the guys at Highland Hardware. They carry the Delta brand and probably have some alternative sources. I had some planer blades sharpened but it's been so many years ago.. sorry the brain fades. Of course you might think about using either the Makita or Tormek attachments if you have either sharpening system. Also there are hand methods that keep the blades tuned up that you do while the blade is left in the jointer.

Send me an email if you want to chat about it.

[Sam Chambers]

Steve, I don't know exactly where you are in the Atlanta area, but you could try Butler Saw Co. in Lawrenceville.