John Harden
01-15-2006, 10:51 AM
Anyone out there have plans or dimensions for G&G dining room chairs, preferably Blacker House ones? I know I can use "standard" dining chair dimensions to make them, but would very much like to see dimensions and/or plans for what the Greene's made.
Went with the Thorsen house table and the base is complete, including sliding extenders. Aam about to make the top and leaves, then the chairs are next. While the table will seat 12 fully extended, I'll probably stop the chair production run at 8 or 10. I just don't need that many chairs.
I'm hoping to keep the prototype stage of this down to one or two chairs made of poplar and with plans from someone, I might be able to do this.
Any help would be appreciated.
Regards,
John
Went with the Thorsen house table and the base is complete, including sliding extenders. Aam about to make the top and leaves, then the chairs are next. While the table will seat 12 fully extended, I'll probably stop the chair production run at 8 or 10. I just don't need that many chairs.
I'm hoping to keep the prototype stage of this down to one or two chairs made of poplar and with plans from someone, I might be able to do this.
Any help would be appreciated.
Regards,
John