Yet another saw blade storage solution. I really like this one.

[Steven Woodward]

1/4" thick hardboard pieces rest in the slots of the bottom rails, and can pivot back and forth. The ends are sloped 10 degrees. The blade sticks up above the hardboard so that the desired blade can be found visually. A blade can be easliy removed and returned without risk of chipping a tooth by contact with another blade.

Made a 2 minute video with a few construction tips and showing the system in action: https://youtu.be/T79zWFL-Gtc


465712

465713

[Ralph Okonieski]

I really like this one also. Excellent idea!

[Rick Potter]

Pretty trick setup Steven. Very nicely done.

I cheaped out and just made a drawer unit with a drawer sized to 12" blades, and use 1/8" hardboard for loose spacers.

Man, that drawer is heavy with all those blades in it.

[Jim Becker]

Just don't accidentally run your hand over the top of that. LOL :)