PDA

View Full Version : Parts detective challenge


Mike Stelts
09-23-2021, 7:30 PM
I found what look like spindles for a small shaper? Does someone recognize these?

465221
Thanks,
Mike
Tony Joyce
09-23-2021, 10:32 PM
They appear to be for a Delta.
Cary Falk
09-23-2021, 10:41 PM
They look like the ones I had on my 3hp Grizzly, 1/2", 3/4", and 1"
Bill Dufour
09-24-2021, 1:48 AM
The other end will determine what they fit. The end shown is like my King Sealy by sears or my grizzly. diameter?
Bill D
Mike Stelts
09-24-2021, 9:18 AM
The diameter is 39/64". The threads for the hold-down rod (can't see in picture) are 3/8-24. I looked at the parts catalog for a Delta shaper and it looks very similar; but, did Delta offer 1" spindles?
Bill Dufour
09-24-2021, 10:24 AM
My Grizzly 1+1/2 HP shaper the spindle nut top tang and bottom nut are metric. I assume the holddown bolt threads are metric as well.
39/64" = 15.5mm which seems unlikely.
Bill D.
Mike Stelts
09-24-2021, 10:40 AM
The imperial thread size, which I should have checked originally, is also a big clue.