john mclane
01-13-2006, 3:33 PM
Moved into this 150 yr old house about 4 years ago. I've finished some house refinishing and now can get working on my workshop until the next large project ((panel wainscoting in the dining room??). It is an old stone cellar, somewhat damp but can be controlled with dehumidifiers. I have had water on the floor in small areas during a wet spring storm with a thaw. So I have to keep everything off the floor and keep everything waxed or oiled. It is only 7.5 ft tall. The main area in the photgraphs is about 15X18 ft but I have a adjacent room about 12 ft wide I could also use (assembly and finshing area?) and other areas for wood storage.
I have an old assembly table at one end of the main room. I have a table saw with a router table extension, small drill press, mortiser, miter saw and the start of a good collection of hand tools and miscellaneous power tools. I'm planning on adding a band saw and a dust collection system this year. I'm going to start this month on a workbench.
On the walls I'll add peg boards and some closed and open cabinets.
I am worried overall about the moisture level and the basement but have been able to keep the table saw (and other tools that I use) that have been down there already for 4 years clear of any oxidation.
What advise can I get for this smaller area and with my plans? I just started using visio to try to plan out the layment of the tools and pipes for the dust collection system.
I have an old assembly table at one end of the main room. I have a table saw with a router table extension, small drill press, mortiser, miter saw and the start of a good collection of hand tools and miscellaneous power tools. I'm planning on adding a band saw and a dust collection system this year. I'm going to start this month on a workbench.
On the walls I'll add peg boards and some closed and open cabinets.
I am worried overall about the moisture level and the basement but have been able to keep the table saw (and other tools that I use) that have been down there already for 4 years clear of any oxidation.
What advise can I get for this smaller area and with my plans? I just started using visio to try to plan out the layment of the tools and pipes for the dust collection system.