Howard Rosenberg
09-13-2021, 6:50 PM
My Delta CS won't start.
It worked fine Saturday. But today, I lifted off the belt to grind something off the motor's mounting plate. And when I reinstalled the blade, I noticed the arbor wouldn't rotate - at all.
Went back to the motor side. The belt was only on the motor's pully, not the arbor's.
DUH.
Put the belt back on both pullies and heard a little "click." I pressed the little button on the motor.
The saw won't start.
Checked the fuses.
Tried a different extension cord.
Nothing.
If anybody knows where I should look to fix this, I'd really appreciate your help.
It worked fine Saturday. But today, I lifted off the belt to grind something off the motor's mounting plate. And when I reinstalled the blade, I noticed the arbor wouldn't rotate - at all.
Went back to the motor side. The belt was only on the motor's pully, not the arbor's.
DUH.
Put the belt back on both pullies and heard a little "click." I pressed the little button on the motor.
The saw won't start.
Checked the fuses.
Tried a different extension cord.
Nothing.
If anybody knows where I should look to fix this, I'd really appreciate your help.