Rubber sleeve for the infeed roller on a planer?

[Mark Gibney]

Hi, anyone know if I can get a rubber sleeve to fit over the infeed roller on a Powermatic 100 planer?
I asked google but there was no good reply.
thanks, Mark

[Cary Falk]

Don't know about the sleeve but Western Roller will coat it with urethane for you. you can give them a call about price. Great outfit to deal with.

https://westernroller.com/

[Kevin Jenness]

If you sleeve or build up the existing roller it will turn at a higher surface speed than the outfeed roller, which could be problematic. You may want to turn down the infeed roller before coating to maintain the original diameter.

[Cary Falk]

I am pretty sure Western Roller will turn it down for you

[Mike Burke]

I did this on my Jet 15" planer and it has worked great so far
https://sawmillcreek.org/showthread.php?291206-Jet-15-quot-Planer-Roller&highlight=

[Mark Gibney]

Thanks Cary, I'll call them later today.

[Mike Burke]

I had JJ Short do the rubber covering for me.
https://www.jjshort.com