Help looking for router bit

[Terry Starch]

Hey everyone, I’m looking at buying a 3/16” D x 1 1/4” CH x 1/4” SHK router bit. Please give me a link so I can check them out. Thanks woodworkers!!

Im not a online guy so I can’t find stuff good!

[Paul F Franklin]

Plenty of 3/16 diameter bits out there, but nothing even close to 1 1/4 cutting length. Might be out there somewhere, but it would be a very fragile bit.

[Jim Becker]

I agree with Paul. I do have a 3/16" o-flute for my CNC that I use for cutting plastic, but in those smaller sizes, long cutting lengths are rare. The best bet is a "foam" bit, but they are not really a good fit for cutting deep in wood because they are so fragile as Paul mentioned.

[lowell holmes]

Try this link.

https://search.yahoo.com/search;_ylt=A0geJGsMnhZh_p4ACwJXNyoA;_ylc=X1MDMjc2 NjY3OQRfcgMyBGZyA21jYWZlZQRmcjIDc2EtZ3Atc2VhcmNoBG dwcmlkA3FJVWVYLnN1UThpb0lrSXRnUTZnaEEEbl9yc2x0AzAE bl9zdWdnAzQEb3JpZ2luA3NlYXJjaC55YWhvby5jb20EcG9zAz MEcHFzdHIDUm9vdHN0b3duLCBPaGlvIHJvdXRlciAEcHFzdHJs AzIzBHFzdHJsAzI2BHF1ZXJ5A3Jvb3RzdG93biUyMG9oaW8lMj Byb3V0ZXIlMjBiaXRzBHRfc3RtcAMxNjI4ODcyMjI2BHVzZV9j YXNlAw--?p=rootstown+ohio+router+bits&fr2=sa-gp-search&fr=mcafee&type=E211US739G0