View Full Version : custom router bit
Kevin Jenness
08-04-2021, 10:57 PM
I am going to be making some parts that require a custom made router bit for an integral drawer pull, like a t-slot bit but an odd size. Any recommendations for a vendor?
Tom M King
08-05-2021, 8:14 AM
Several years ago, Whiteside started making them only in multiples of six, and no longer make singles. They sent me down the road a little ways to these guys, who will make singles. Very nice to deal with.
http://www.hickorysawandtool.com/
You might call Todd, at Whiteside. They make bits for other companies, and he will know if they make one like you're talking about for someone else, which would be a lot cheaper than a custom one-off.
Rich Engelhardt
08-05-2021, 9:22 AM
Carbide Processors should be able to fix you right up.
https://carbideprocessors.com/
(incredibly nice people to deal with)
Mark Bolton
08-05-2021, 10:51 AM
Ive used:
James Majerus
Total Tooling Technology, Inc.
1475 Elmhurst Rd.
Elk Grove Village, IL 60007
Ph:847-437-5135
Great to deal with.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.