this video will show tracing a metal part on the drawing table

[stan kern]

it will also show tracing out the bolt pattern and inputting the correct diameter
for a perfect fit.
I will include placing the cut part back on the original and aligning the bolts
in the bolt holes


Show tracing a metal part on the drawing table


https://youtu.be/8EWtu2T5EqA

[Keith Outten]

Nice job Stan. Thanks for the video link.

[stan kern]

here is the new watchable video
https://logicgroup.vids.io/videos/ea9ddcb31716e6c563/trace-a-metal-part-with-bolt-holes-and-check-the-fit