View Full Version : Segment edge length setup with wedgie sled
Mark Inmon
07-06-2021, 12:10 PM
Added this to my wedgie sled to measure for cutting the segments 460625
Zoom in on the bottom left arm for the details
Jim Morgan
07-06-2021, 10:58 PM
? Sometimes a few words help to explain a picture.
-- Jim
Sam Force
07-07-2021, 12:19 AM
Not sure what improvement you have made. Using a caliper?
Bob Coates
07-07-2021, 3:07 PM
A guess is that he marks the piece to be cut. The caliper is fixed to the sled, so just open jaws and mark wood, then cut.
Robert Hayward
07-08-2021, 1:11 PM
A guess is that he marks the piece to be cut. The caliper is fixed to the sled, so just open jaws and mark wood, then cut.
Making segmented sections and measuring each one individually to make the cut??? Surely that cannot be what this is used for.
Tim Elett
07-08-2021, 6:19 PM
Maybe using the depth rod to measure length of cut. Maby a solution for misplaced tool.I unplug saw and measure from the edge of blade to the stop, missed placed tools, working on it
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.