PDA

View Full Version : Joe Tonich !!!



Ken Salisbury
02-20-2003, 11:06 AM
Joe,
I don't know if you saw the pics of the bowl I made from that piece of spalted maple you brought me last year. I posted them on the Pond but I don't know if you saw them. So here they are again:
(7" x 4½")
<p align="center">
<IMG src="http://www.klsal.com/spalt2.jpg">
<p align="center">
<IMG src="http://www.klsal.com/spalt3.jpg">
<p align="center">
<IMG src="http://www.klsal.com/spalt1.jpg">

<p align="center">
<IMG src="http://www.klsal.com/banner.png">

Joe Tonich
02-20-2003, 1:22 PM
I must have missed the Pond Post! I like what you did with it! I'm going to give my sawyer a call and see if he still has any more. If so, I'll bring them with me in April. BTW, did you have any problems turning it? He told me he tried to give some to someone at one of the woodworking stores around here and the guy woudn't take it. Said it was no good for turning! If it was "Punky" let me know.

Joe

Ken Salisbury
02-20-2003, 1:40 PM
Originally posted by Joe Tonich
I must have missed the Pond Post! I like what you did with it! I'm going to give my sawyer a call and see if he still has any more. If so, I'll bring them with me in April. BTW, did you have any problems turning it? He told me he tried to give some to someone at one of the woodworking stores around here and the guy woudn't take it. Said it was no good for turning! If it was "Punky" let me know.

Joe

It turned well and the finish was fantastic. Get all you can get. Tell him we will take it off of his hands for a small fee even if I have to rent a trailer to haul it home. <IMG src="http://www.klsal.com/smiley2.gif">
<p align="center">
<IMG src="http://www.klsal.com/banner.png">