Bart Leetch
01-10-2006, 12:11 AM
I got tired of cleaning up all the sawdust around & behind the CMS. Sooo experiment time I started with a box & added the wings & inside directing flaps & top pivoting flaps. I looked in my collection of used hinges & came up with 4 old hasps which I contact glued to the 1/8" masonite which came out of the bottom of some old drawers the box frame is an old door frame with a piece of CDX plywood on the bottom. I have maybe 25 cents worth of air nails in it.
If you'll look at the outside bottom right hand corner you can just see part of a knob which is on the end of a 1/4" dowel pulling it will open the dc gate.
This system doesn't get all the chips but does get most of them.
From a somewhat of a Newer Yankee Workshop
If you'll look at the outside bottom right hand corner you can just see part of a knob which is on the end of a 1/4" dowel pulling it will open the dc gate.
This system doesn't get all the chips but does get most of them.
From a somewhat of a Newer Yankee Workshop